The battery of the screwdriver is made up of separate components. These are banks of Nickel-cadmium or Nickel-manganese chemistry in the SC form factor.
The main characteristics of the screwdriver battery cans: voltage 1.2 Volts, standard charge current 0.2 s, weight 58 grams, internal resistance 10 MW, diameter 23 mm, height 43 mm, temperature range from -18 to + 30 degrees Celsius.
The chemical composition of the screwdriver battery cans mainly depends on the capacity of the elements, which can also vary from 1200 to 3000 mAh. For more capacious batteries the chemical composition of Nickel-manganese is used.
How to calculate the optimal charging current. On the passport it is in the values of 0.2 s. to know the current required is 0.2 times the battery capacity. For example, 0.2*3000 mAh = 600 mA standard current on any domestic charger. If the power is less, the charging current must be reduced to 250-260 mA.
On the issue of battery discharge, the lower voltage threshold is at 1 Volt. Below this value it is not desirable to discharge them. The life cycle is in the range of 500-1000 charges-bits.
The discharge current of the Nickel-kadievich cells of the battery of the drill varies, but is in a very wide range from 1C to 10C. In practice, this is from 3 to 30 Amps.
SC battery 1300 mAh for the screwdriver
- Product Code: prod29
- Availability: In Stock
- Ex Tax: 100.00₽